| 1. | In this example , they are named node 1 and node 2
在此例中，它们分别被命名为节点1和节点2 ： |
| 2. | Verify that node 1 has been evicted from the cluster definition
验证节点1是否已从群集定义中逐出。 |
| 3. | 8 . repeat the preceding steps for node 2 instead of node 1
8 .对节点2重复对节点1执行的上述步骤。 |
| 4. | 1 . start with both node 1 and node 2 running the cluster service
1 .启动运行群集服务的节点1和节点2 。 |
| 5. | Install new hardware to replace the failed hardware in node 1
安装新的硬件，以替换节点1中发生故障的硬件。 |
| 6. | Node 1 rejoins the cluster
将节点1重新加入群集。 |
| 7. | Resolve the problem with node 1
解决节点1的问题。 |
| 8. | Phase 2 : upgrade node 1
第二阶段：升级节点1 |
| 9. | At this point , the cluster that had been running on node 1 and node 2 no longer exists
此时，运行在节点1和节点2上的群集已不存在。 |
| 10. | 6 . perform validation tests on node 1 to certify that the node is fully functional
6 .在节点1上执行确认测试以保证该节点的功能完全正常。 |
